Possible to get the fine finish, because the rotating speed is kept constant even under load conditions. makita mower cordless lawn If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. mower lawn The term battery or battery cartridge in this instruction manual refers to the followings: WARNING: When using electric lawnmowers, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury; including the following. WARNING: Only use the portable power packs listed above. CAUTION: Always switch off the machine before installing or removing the portable power pack. WARNING: Always be sure that the lock key and battery cartridge are removed from the mower before storing or carrying the mower or attempting to perform inspection or maintenance. CAUTION: If the cut grass or foreign object blocks up inside of the mower body, be sure to remove the lock key and battery cartridge and wear gloves before removing the grass or foreign object. NOTE: The indicator lamp for the remaining battery capacity is just for reference. The main power lamp will light up. In the soft no-load mode, you can minimize start-up shock. Be thoroughly familiar with the controls and the proper use of the mower before starting. In this case, stop the operation immediately and empty the basket. When the grass basket is almost full, the indicator does not float while the blades are running. NOTICE: When using the machine with the mulching plug, make sure that the total length of grass after cutting is 30 mm (1-3/16) or more, and the cut length is 15 mm (9/16) or less.

NOTICE: Use this machine for mowing lawns only. Remove the mulching plug while holding down the lever. Turn the bolt counterclockwise with box wrench 17. WARNING: Always remove the lock key and battery cartridge when removing or installing the blade. Do not try to cut long grass all at once.

Attach the cord to the cord holders as shown in the figure. WARNING: Always wear safety goggles or safety glasses with side shields when performing inspection or maintenance. The machine will automatically stop during operation if the machine or battery is placed under one of the fol- lowing conditions: Overload protectionWhen the battery is operated in a manner that causes it to draw an abnormally high current, the machine automatically stops and the main power lamp blinks in green. To avoid unintentional start-up, the main power switch will automatically shut down when the switch lever and drive lever (if equipped) are not pulled for a certain period after the main power switch is turned on. CAUTION: Make sure that the portable power pack is securely installed on the machine. Operation of the machine in a partially assembled state may result in serious personal injury from accidental start-up. Attach all the clips to the frame as shown in the figure. Depending on the conditions of the lawn or the ground, the actual lawn height may become slightly different from the set height.NOTE: Try a test mowing of grass in a less conspicuous place to get your desired height. Put the mower on its side so that the mowing height adjusting lever comes to the upper side. WARNING: The blade coasts for a few seconds after releasing the switch. If the cord is damaged, the mower switch may not work. It has a top/bottom face. NOTE: The mower does not start without pressing the switch button even the switch lever is pulled. To remove the portable power pack, perform the installation procedure in reverse. The mulching plug allows you to return the cut grass to the ground without gathering the cut grass in the grass basket. Furthermore, clear away any weeds from the mowing area in advance. When the remaining battery capacity becomes low, the indicator lamp blinks or lights up. NOTE: The mowing height figures should be used just as a guideline. WARNING: To reduce the risk of accident, regularly check the grass basket for any damage or weakened strength. Soft no-load mode lamp 2. NOTE: Mower may not start due to the overload when you try to mow long or dense grass at a time. Overheat protectionWhen the machine or battery is overheated, the machine stops automatically and the main power lamp lights up in red. CAUTION: These accessories or attachments are recommended for use with your Makita machine specified in this manual. WARNING: Before installing the battery cartridge, always check to see that the switch lever actuates properly and returns to the original position when released. Please refer to the annexed warranty sheet for the most current warranty terms applicable to this product. When you press the mode switching button again, the machine shifts to the noise reduction mode, and the noise reduction mode lamp lights up in green. Some examples of these chemicals are compounds found in pesticides, insecticides, fertilizers, and herbicides.Your risk from these exposures varies, depending on how often you do this type of work. The weight may differ depending on the attachment(s), including the battery cartridge. NOTE: If the main power lamp lights up in red or blinks in red or green, refer to the instructions for the machine/battery protection system.NOTE: This machine employs the auto power-off function. Release the switch button as soon as the motor starts running. Mode switching button 4. Check all nuts, bolts, screws, etc. Remove the lock key and battery cartridges, and then close the battery cover. Instead, ask Makita Authorized Service Centers, always using Makita replacement parts for repairs. When you operate the machine with the discharge attachment, be sure to install the mulching plug and remove the grass basket. The followings show the symbols used for tool. Do not start any operation until the blade comes to a complete stop. WARNING: Always make sure that the lever fits in the groove properly before operation. The traveling speed can be adjusted with the speed lever.

If you find a problem that is not explained in the manual, do not attempt to disassemble the machine. If you notice anything unusual with either of the lock key or switch, stop the operation immediately and have them checked by your nearest Makita Authorized Service Center. WARNING: Always turn off the main power switch when not in use. Tips for maintaining maximum battery life. Align the hole in the lower handle with the hole in the upper handle, then insert the bolt from inside, and then tighten the nut from outside with box wrench 13. Discoloration, deformation, or cracks may result. 1. Operating the machine with a switch that does not actuate properly can lead to loss of control and serious personal injury. The actual battery capacity may differ depending on the usage conditions. The grass level indicator shows the volume of mowed grass. To turn off the machine, press the main power switch again. WARNING: Never start the mower unless it is completely assembled. Pour water toward the bottom of the machine to which the blade is attached. Open the plug cover, then align the arrow insert the socket into the plug all the way. Specifications may differ from country to country. Store the lock key in a safe place out of reach of children. 1. In this case, remove the battery from the machine and charge the battery or charge the battery to fully charged ones. When the machine is turned on, the machine starts up in the normal mode.When you press the mode switching button, the machine shifts to the soft no-load mode, and the soft no-load mode lamp lights up in green. NOTICE: When installing the mower blade, make sure that the protrusions on the blade support fit in the holes in the mower blade. Due to our continuing program of research and development, the specifications herein are subject to change without notice. Main power switch. To lock the blade, insert the pin into a hole on the lowerbody. Inspect moving parts for damage, breakage, and wear. NOTICE: Never use gasoline, benzene, thinner, alcohol, or the like. To install the grass basket, follow the steps below. WARNING: Never put your hand or leg under the mower body when adjusting the mowing height. When carrying the mower, hold the front grip and rear grip with two people as shown in the figure. on makita CML01 Battery Powered Lawn Mower Instruction Manual, Important safety instructions for battery cartridge, Installing or removing the portable power pack, Indicating the remaining battery capacity, makita XAD05 Cordless Angle Drill Instruction Manual, makita UD2500 Electric Garden Shredder 2500W 45mm Instruction Manual, KOMPLETT PRO TECH 51cm Battery Powered Lawn Mower Instruction Manual, greenworks Optimow 4 Robot Lawn Mower User Guide, JBL Battery-Powered Lavalier Microphone User Guide, Srichpk P36A-Black Smart Watch User Manual, Shanghai Laisi Information Technology 2021AG Smart Rope User Manual, Pocket Juice Wireless Charging Power Bank User Manual, PHILIPS 439P1 Brilliance 4K Ultra HD Business Monitor User Guide, MARZAN SECURITY Electronic Lock with Keypad Round User Manual, ZERFUN G8 Pro Wireless Microphone System User Manual, Airrex Infrared Heater AH-200/300/800 User Manual, 2017 Toyota Camry Hybrid LE Fuse Box Diagrams, 2017 Mitsubishi Lancer 4WD Fuse Box Diagrams, Mitsubishi Lancer Passenger and Engine Fuse Box Diagram, Mira Honesty ERD Bar Valve and Fittings User Manual, Part number of the replacement mower blade, L: 1,630 mm to 1,715 mm (64 to 67-1/2) W: 590 mm (23-1/4). Replace the grass basket if necessary. Periodically check the grass basket for mowed grass. Install the portable power pack to the machine as shown in the figure. The centerlines of the front wheels are guidelines for mowing width.

The use of any other accessories or attachments might present a risk of injury to persons. NOTE: This indicator is a rough guide. Firmly tighten 4 bolts which were temporarily tightened in step 1 using box wrench 13. Lock the locking levers on both sides of the portable power pack. Make sure that all the clips are securely attached to the frame. This system automatically cuts off power to the motor to extend machine and battery life. WARNING: Install the mower blade carefully. 1. CAUTION: Before removing the bolts, hold the upper handle firmly. For PDC01NOTE: Before installing the portable power pack to the machine, install at least one battery to battery port 1 or 2, and at least one battery to battery port 3 or 4.

Instead, mow the lawn in steps.

Release the switch lever and drive lever. In the noise reduction mode, you can decrease the noise at mowing.When you press the mode switching button again, the machine returns to the normal mode. Mode switching buttonYou can switch the operating mode by pressing the mode switching button. WARNING: Make sure that the mower blade and all the fixing parts are installed correctly and tightened securely. WARNING: Always remove the lock key when the mower is not in use. Open the lock key cover, then insert the lock key in the place shown in the figure as far as it will go, and then close the lock key cover. Open the plug cover, then align the arrow mark on the socket with that on the machine, and then insert the socket into the plug all the way. NOTICE: Using the mower with the grass basket full prevents smooth blade rotation and places an extra load on the motor, which may cause a breakdown. Lower handle 3. WARNING: Always wear safety goggles or safety glasses with side shields when operating the mower. Recharge the battery. NOTE: Some items in the list may be included in the product package as standard accessories. Overlapping area 3. In this situation, turn the machine off and stop the application that caused the machine to become overloaded. This mower is equipped with a lock key and handle switch. Dont store the mower and charger in locations where the temperature may reach or exceed 40 C (104 F). Failure to remove the lock key and battery cartridge may cause a serious injury. Attach the cord to the cord holders as shown in the figure. Main power lamp 5. Otherwise, the handle may fall and cause an injury.The handle height can be adjusted in two levels. Your email address will not be published. Install the portable power pack, and then insert the lock key.

Place the cord of the portable power pack as shown in the figure. CAUTION: Only use genuine Makita batteries.Use of non-genuine Makita batteries, or batteries that have been altered, may result in the battery bursting causing fires, personal injury, and damage. Firmly hold the handle with both hands when mowing.The mowing speed guideline is approximately 7 to 14 meters (23 46 ft.) per 10 seconds. Put the mower on its side so that the mowing height adjusting lever comes to the upper side. Leave a day or two between mowings until the lawn becomes evenly short. The mowing height can be adjusted in the range of between 32 mm (1-1/4) and 100 mm (3-15/16).Remove the lock key, and then pull the mowing height adjusting lever outward of the lower body and move it to your desired mowing height. Electric brake This machine is equipped with an electric brake. Adjust the handle height, and then tighten the upper and lower bolts firmly. In this case, let the machine and battery cool before turning the machine on again. WARNING: The use of this product can create dust-containing chemicals which may cause respiratory or other illnesses. WARNING: Always wear gloves when handling the blade. NOTICE: After installing the mower blades, remove the pin from the lower body. Remove the upper bolts of the lower handle using box wrench 13, and then loosen the lower bolts. Clean grass clippings accumulated on the underside of the mower deck. To reduce your exposure to these chemicals: work in a well-ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. WARNING: When you replace the blades, always follow the instructions provided in this manual. The lightest and heaviest combinations, according to EPTA-Procedure 01/2014, are shown in the table. While holding the switch lever, push the drive lever forward and hold it to drive the rear wheels. To remove the grass basket, open the rear cover, and then remove the grass basket by holding the handle. Over-discharge protectionWhen the battery capacity is not enough, the machine stops automatically, the main power lamp blinks in red, and the indicator lamp lights up. Damaged or missing parts should be repaired or replaced.

Constant speed control of blade rotation Electronic speed control for obtaining constant speed. Store mower indoors in a cool, dry, and locked place. When you operate the machine with the mulching plug, be sure to remove the grass basket. The drive system does not work correctly. WARNING: Wear gloves when performing inspection or maintenance. Open the rear cover and take out the grass basket by holding the handle. The blade is imbalanced, excessively, or unevenly worn. (1) 30 mm (1-3/16) or more (2) 15 mm (9/16) or less. Front grip.

WARNING: Always be sure that the lock key and battery cartridge are removed before carrying out any work on the mower. Hold the handle of the grass basket, and then hook the grass basket on the rod of the lower body as shown in the figure. Hold the front grip or the lower handle with one hand, and then move the mowing height adjusting lever with the other hand. Empty the grass before it becomes full. Noise reduction mode lamp 3. Mower blade does not rotate: stop the mower immediately!

Install the portable power pack to the machine as shown in the figure.

United States of America: www.makitatools.comCanada: www.makita.cOther countries: www.makita.com, Makita Corporation3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japanwww.makita.com, KOMPLETT PRO TECH 51cm Battery Powered Lawn Mower Instruction Manual Assembly Position the Mower Assembly on a fl, YARD FORCE Robot Lawn Mower Clear the Lawn Area Positioning the docking station Cutting height adjustment Main switch, The expert for robots in your home With one click to the online shop myRobotcenter.eu myRobotcenter.co.uk Greenworks Optimum, JBL Battery-Powered Lavalier Microphone CONNECTING THE MICROPHONE TO SMARTPHONES/LAPTOPS i. Plug the 3.5mm TRRS connector into the headphone.

Sitemap 63