Open drip proof or totally enclosed fan cooled enclosures available as standard. The protected mechanical seal is a of a special diaphragm design that retains water in the casing at all times to ensure that the mechanical seal will never be run dry. The unit features a built-in overload with automatic reset and stainless steel shaft. Pumping will simply resume as soon as the water level rises above the foot valve. Note: For three phase motors, Class 20 overload protection must be provided in starter unit. Generous space for removal of motor mounting nuts with regular open-end wrench. Bowls: Stainless steel for strength and abrasive resistance. Check Valve: Screws into discharge head from the top, easily removed for drain-back systems or replacement without disassembling the pump. Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. NOTE: The pump has left hand casing threads. Powered for Continuous Operation: All ratings are within the working limits of the motor as recommend-ed by the motor manufacturer. Capable of pumping over 1600' TDH. Powered for Continuous Operation: All ratings are within the working limits of the motor as recommended by the motor manufacturer. PE31 Pump: Maximum capacity: 53 GPM; Maximum head: 25 TDHPE41 Pump: Maximum capacity: 61 GPM; Maximum head: 29' TDHPE51 Pump: Maximum capacity: 70 GPM; Maximum head: 37' TDHThe motor features are as follows: Single phase; 60 Hertz; 115 and 230 volts; built-in thermal overload protection with automatic reset; Class B insulation; Oil-filled design and High strength carbon steel shaft.PE31 Motor: .33 HP, 3000 RPM; 115 volts; Shaded pole designPE41 Motor: .40 HP, 3400 RPM; 115 and 230 volts; PSC designPE51 Motor: .50 HP, 3400 RPM; 115 and 230 volts; PSC designPS Available in .40 and .50 (60 Hz)Models: PS4, PS5This residential wastewater submersible sewage pump is primarily used for residential sewage systems, heavy duty sump/dewatering and water transfer. Pump can be operated continuously without damage to the motor. Metal Parts are Stainless Steel: AISI types 301 and 304 are corrosion resistant, non-toxic and non-leaching. Non-Metallic Parts are FDA Compliant: Impellers, diffusers and bearing spiders are constructed of a glass filled, corrosion resistant engineered composite. Discharge Head: Engineered composite material for superior strength and corrosion resistance. JS_J5S_J5SH_J7S_J10S_J15S_Shallow_Well_Jet_Pumps_Technical_Brochure.pdf, Motor_Application_and_Installation_Data_Manual.pdf, Water_Products_Technical_Data_and_Pump_Fundamentals.pdf, Back pull-out design allows disassembly of pump for service without disturbing piping, Two compartment motor for easy access to wiring and replaceable components, Corrosion resistant, engineered plastic tubing and fittings are easily removed for cleaning, Protected mechanical seal with a special diaphragm design that retains water in the casing at all times to ensure the mechanical seal can never run dry, Corrosion and abrasion resistat glass filled noryl impeller, F.D.A. Two cast-in safety line loops for installer convenience. The 60 Hz 3500 RPM motor is offered in both single phase (115/230 V) and three phase 208-230 (3HP 230V) or 208 230/460 V with NEMA standard 56J frame. _Hasync.push(['Histats.start', '1,4397655,4,0,0,0,00010000']); NOTE: For three phase motors and 5 HP single phase, overload protection must be provided in starter unit. *100' cords available by adding "J" suffix in place of "A" on end of part number.PE Available in .33, .40, and .50 HP (60 Hz)Models: PEThis residential wastewater submersible effluent pump is primarily used for on-site wastewater treatment; mound systems, effluent/dosing systems, low pressure pipe systems, basement draining, and heavy duty sump/dewatering. These submersible sewage pumps feature a 1 discharge on the HP and a 2 discharge on the HP and larger; solid size is 3/8" solids on 1/2 HP, 2" solids on 3/4 HP and larger; capacities to 130 U.S. GPM (41 m3/h); total heads: to 39 feet TDH (14 m); temperature: 104F (40C) continuous 140F (60C) intermittent; maximum submergence: to 17 feet (5 m); AISI 304 SS casing; AISI 304 SS impeller; and continuous duty rated, non-overloading motor. Tanks must be ordered separately.) The maximum suction (inlet) pressure is 75 PSI and the maximum liquid temperature is 160 F (71 C). 0000003002 00000 n _Hasync.push(['Histats.fasi', '1']); For the best experience on our site, be sure to turn on Javascript in your browser. The features of these submersible pumps are as follows: Powered for Continuous Operation: All ratings are within the working limits of the motor as recommended by the motor manufacturer. Also featuring a built-in overload, an automatic reset and a stainless steel shaft. The units here include the pump, shallow well jet adapter (Nozzle and venturi), an AS4 preset (30-50 PSI) pressure switch and a motor. It has a - 1 HP, 115/230 capacitor start. The motors can be fully submerged in high grad turbine oil for lubrication and efficient heat transfer. Capacity is up to 185 GPM.

0000002077 00000 n The motor features are as follows: Single phase: 60 Hz, 3450 RPM, 1/2 HP, 115 V; 1/2 to 1 HP, 230 V; Three phase: 60 Hz, 3450 RPM, 1/2 to 11/2 HP, 230 and 460 V; non-overloading; air-filled, class F insulated motor; thermal overload protection: built-in with automatic reset on single phase, 115 V and 230 V models; three phase models require external overload in panel; power cord is 20 feet long. Mcu36]sgZiw}f/r{eE4VUr!L&L*zz~gTcI12z7~)L,RmeS 0hJ(Fn Q+XnjpiXKY It has a discharge size of 2 NPT threaded companion flange standard with a 3 option available but must be ordered separately (Order no. Maximum temperature is 104 F (40C) continuous and 140F (60C) intermittent. The impeller is FDA compliant, corrosion and abrasion resistant glass filled Noryl, while the tubings and fittings are FDA compliant engineered plastic that is corrosion and UV resistant. Each JS+ pump has an integral shallow well jet built into the casing, eliminating the need for a separate shallow well adapter. 3656SP now Primeline SPModels: PrimeLineSP, SPM & SPH SeriesThese self-priming centrifugal pumps are primarily used for lawn irrigation, dewatering, liquid transfer, plot irrigation and livestock watering. L Series Available in 3 50 HP range (60Hz)Models: 50L, 65L, 95L, 120L, 160L, 250L, 320LThis 6, stainless steel submersible pump is used for 6 and larger well. The submersible pumps in this group feature: Abrasive Handling Construction: Impellers designed with flat wearing surface which provides effective sand handling capabilities. Field Serviceable: Pump can be rebuilt in the field to like new condition with common tools and readily available spare parts. The deep well vertical jet pumps in this group feature pipe connections of 1 NPT discharge, 1 NPT suction, with a pressure switch of AS4 that is preset at 30-50 PSI. 3656/3756 S GroupModels: 3656 S Group, 3756 S GroupThis residential and commercial bronze fitted, cast iron centrifugal pump primarily is used for booster service, spraying systems, irrigation, water circulation, liquid transfer and general purpose pumping. Pressure Switch ( Included ): 30-50 Preset Three phase: 60 Hz, 3500 RPM, 1/2 to 11/2 HP, 230 or 460 V. Built-in thermal overload protection with automatic reset on single phase models. The submersible sewage pumps in this group have a 2 maximum solids handling capability, discharge size of 2 NPT, and capacities up to 185 GPM. Office hours are: Mon - Fri, 8am - 4:30pm EST excl. Loops for safety line molded into head. Motor Adapter: Engineered composite material with high rigidity to provide accurate alignment of liquid end to motor. Seasonal Service . hbbd`b``3 1 Single phase: Voltage 115/230 ODP and TEFC. Three phase: Voltage 208-230/460 ODP and TEFC. Class F insulation2DW Available in and 1 HP (60 Hz)Model: 2DWThis submersible dewatering pump is primarily used for draining ditches, trenches, basements, manholes, excavating drainage in the building trades, and water removal from basements. Tanks Hydro ProModels: V6P V350 Series, TP and T SeriesThe HydroPro tanks are designed for home, cottage and farm use. trailer <<29B8A49AEDEA4EB997AF2449DC32F599>]/Prev 335903/XRefStm 1263>> startxref 0 %%EOF 493 0 obj <>stream y endstream endobj 464 0 obj <>/Metadata 47 0 R/Pages 46 0 R/StructTreeRoot 49 0 R/Type/Catalog/ViewerPreferences<>>> endobj 465 0 obj <>/Font<>/ProcSet[/PDF/Text/ImageB]/Properties<>>>/XObject<>>>/Rotate 0/StructParents 2/TrimBox[0.0 0.0 612.0 792.0]/Type/Page>> endobj 466 0 obj <>stream All ratings are within the working limits of the motor and it has Class B insulation. Inlet / Outlet Pipe Connections: 1" NPT / 1" NPT. Maximum temperatures are 212F (100C) with standard seal or 250F (121C) with optional high temperature seal. The single phase 60 Hz motor features; capacitor start motors for maximum starting torque, built-in overload with automatic reset, SJTOW or STOW severe duty oil and water resistant power cords, 1/3 1 HP models have NEMA three prong grounding plugs, 1 HP and larger units have bare lead cord ends. These submersible sump pumps feature 1 NPT discharge with capacities to 38 GPM; maximum head: 25 feet TDH; maximum solids: 3/16" spherical; temperature: 104 F (40 C) maximum liquid temperature and Mechanical seal: ceramic/silicon carbide faces with BUNA elastomers. Programming is pre-set to 30 Hz minimum speed; True Motor Match Rated for the higher amps typical of higher HP submersible pumps; Transducer 0 300 PSI pressure transducer is included with the drive. It also comes with a stainless steel shaft with ball bearings. The submersible sewage pumps in this group have solid handling capabilities up to 2 maximum. These controllers include: single phase input voltage ONLY, 208 230 volt; 15% tolerance (115 volt option available on 1 HP, 1AB2); maximum amperage on motor is 16.6 Amps with 5; HP controller; motor must be three phase; 208 230 volt, 10%; flows up to 110 GPM, with 5 HP pump; pressure factory set for 50 psi; field programmable pressure setting up to 80 psi; total system; outdoor rated, NEMA 3R enclosure, rain-tight;UL, CUL, CE approvals; FCC compliant for interference; signal lights for pump running, faults, stopped; self-diagnostic, plug-in display not needed; field setting for booster pumps; Wall mounted with convection air cooling; maximum ambient temperature 104 F; electrical efficiency above 95%; simple and quick installation. Single phase: 60 Hz, 3500 RPM, 1/2 HP, 115 and 230 V; 3/4 and 1 HP, 230 V only. GS 5 to 25 Range Available in 5 HP (60Hz)Model: 5GS, 7GS, 10GS, 13GS, 18GS & 25GSThis 5 HP, 60Hz submersible pump is primarily used for private 4 water wells, general water supply for homes, farms, irrigation and some light commercial.

This variable speed single pump controller features include: Easy Set-up Pre-set for submersible or surface motor characteristics. These end suction pumps feature capacities to: 1600 GPM (363 m3/hr) at 3500 RPM, 4500 GPM (1020 m3/hr) at 1750 RPM; heads to 490 feet TDH (150 m) at 3500 RPM, 300 feet TDH (90 m) at1750 RPM; working pressure to 200 PSIG (14 bars) and Suction pressure to 100 PSIG (7 bars). This end suction centrifugal pump has working pressures to 75 PSIG (5 bars) 125 PSIG (9 bars) optional seals. Retrofit a conventional system into a premium constant pressure system using the Aquavar Solo controller. The motor features are as follows: single phase, 3450 RPM, 60 Hz; LSP03, 1/3 HP, 115 V, 2.9 maximum amps; LSP07, HP, 115 V (7.1 amps) or 230 V (3.5 amps); built-in thermal overload protection with automatic reset; permanent-split-capacitor type; Class B insulation; stainless steel shaft; air filled design; and power cord length: LSP03; 10 feet standard, 20 feet optional, LSP07; 20 feet. Another key feature of the Goulds JS+ Shallow Well Pump is the air handling ability, meaning the pump can automatically reprime itself after the initial prime, even when air gets into the system. A1-3). Also featuring a built-in overload, an automatic reset and a stainless steel shaft.

WS BF Series Sewage Pumps Available in 1/3 1 HP (60 Hz)Models: 3887BFThis residential wastewater submersible sewage pump is primarily used for homes, water transfer, sewage systems, light industrial, dewatering/effluent and commercial applications. Whether you would like additional information or are interested in getting a quote, we're here to help. Orders are shipped the next business day. Starter with overloads must be ordered separately. The features of these submersible pumps are as follows: Field Proven Design: The GS Xtreme features super strong construction due to the welded casing joints at both ends. Available in 30 60 Hz pump motor kits (Note: ProPak kits do not include pressure tanks. The built-in check valve is constructed of stainless steel and FDA compliant BUNA rubber for abrasion resistance and quiet operation. Motor Adapter: Cast 303 stainless steel for rigid, accurate alignment of pump and motor. Keep me on the current site. hb```b``y`Abl,gYr``1`{oS I7s,p]'uP{t4 `TR y@fe`:XB"p[ * 9L80ne; ' L;r~^"^-30>ap9 The submersible sewage pumps in this group use 300 series stainless steel fasteners with a 20 Power cord and standard silicon carbide/silicon carbide outer seal. These drainage booster pumps feature a 1 NPT discharge and open suction; Maximum suspended solids 1/8"; capacities: to 35 U.S. GPM (7.9 m3/h); total heads: to 240 feet TDH (70 m); temperature: 104F (40C) continuous 140F (60C) intermittent; maximum submergence: to 65 feet (20 m); and continuous duty rated, non-overloading motor. Starter and heaters (3) must be ordered separately.) These submersible effluent pumps feature solids handling capability: " maximum; capacities: up to 60 GPM; total heads: up to 31 feet.

For pumping range see performance chart or curve. The Motor specifications: NEMA 48 or 56 square flange frame. Single phase motors have built-in capacitor and overload with automatic reset. An external contact such as a timer can be used to change between them; and No Water Restart The time delay between dry well faults is adjustable from 10 minutes to 2 hours. Optional TEFC motors are availableGS 33 to 80 Range Available in 10HP (60Hz)Model: 33GS, 40GS, 55GS, 60GS, 75GS & 80GSThis 10 HP, 60 Hz submersible pump is designed for residential and small municipal water supply as well as light irrigation. Could not find any links for specified country. The motors are as follows: 2 HP single phase 230/115 V, 60 Hz, ODP; 3 HP and 5 HP single phase 230 V, 60 Hz, ODP; 2 HP and 3 HP single phase 208230 V, 50/60 Hz, TEFC; 2 HP, 3 HP and 5 HP three phase 208230/460 V, 50/60 Hz, ODP (5 HP is 60 Hz only); 2 HP, 3 HP 208230/460 V, 50/60 Hz, TEFC. HSC Available in 3/4 1 1/2 HP, 115/230 V; 2 and 3 HP, 230 V, 60 HzModels: Single phase; HSC07, HSC10, HSC15, HSC20, HSC30 Three phase; HSC07B, HSC10B, HSC15B, HSC20B, HSC30BThis horizontal multi-stage centrifugal pump is primarily used for general purpose pumps, water circulation, booster service, liquid transfer, spraying systems and jockey pump service. US Department Energy Efficiency Standards, Residential/Agriculture Distributor Locator, Jet Pump Series Brochure (BRJETSERIES R3), JS J5S, J5SH, J7S, J10S, J15S Shallow Well Jet Pumps (BJS R4), JS 50 Hz Shallow Well Jet Pumps 12 and 1 HP 50 HZ (BJSZ R3), Water Products Technical Data and Pump Fundamentals (TTECHWP R5), Submersible & Jet Pumps Service Manual (GSSERVICE R8), Motor Application and Installation Data Manual (BMAID R15), Repair Parts (for obsolete product) Jets Submersibles (ROBJETSU R1) - Obsolete, NSF 61 Certified: Ensuring safety when used in drinking water systems, Two Compartment Motor for Easy Access to Wiring. This 60Hz, single phase product includes standard NEMA service factors and operates at 3500 RPM. SJ Available in , 1, 1 , & 2 HP (60Hz)Model: SJ07, SJ10, SJ15, SJ20This deep well vertical jet pump is great for use in homes, cottages, and on farms. There are ball bearings upper and lower and the power cord is 20 feet standard 14/3 STOW. This self-priming centrifugal pump features flows to 240 GPM; heads to 165 feet, reprime capabilities to 25', 2" through 3" suction, 1" through 2" discharge, and maximum temperature 160F . Shaft: Stainless Steel Shaft Seal: Standard Mech. This pump can come in 3 configurations: all bronze pump, all cast iron pump and bronze fitted pump.The motor features: NEMA standard JM frame or JP frame for 3656 or T-frame for 3756. )&"e.HDu5|nd7U!b8C/d[f4uYEcYTfL2Mb(pvI7YlX The bolt down diffuser provides positive alignment with the impeller and includes a stainless steel wear ring, as well as FDA compliant, injection molded, glass filled Lexan for extended performance in abrasive conditions. The three phase 60 Hz motor features include: Class 10 overload protection must be provided in separately ordered starter unit; STOW power cords all have bare lead cord ends; designed for Continuous Operation pump ratings are within the motor manufacturer's recommended working limits and can be operated continuously with-out damage when fully submerged; Bearings: Upper and lower heavy duty ball bearing construction; Power Cable is severe duty rated, oil and water resistant with epoxy seal on motor end which provides secondary moisture barrier in case of outer jacket damage and to prevent oil wicking (Standard cord is 20'. The Shaft is 300 series stainless steel threaded design. The enclosed design upper bearing is mounted in a durable Noryl bearing spider for excellent abrasion resistance. Pumping resumes once the water level rises above the foot valve, Clockwise rotation when viewed from motor end. -JuY1 +Om>Of=h3dMJ 0000001263 00000 n The motor features are: Single phase: 3450 RPM, 115 and 230 V, 60 Hz; Three phase: 3450 RPM, 230 V and 460 V, 60 Hz; non-overloading; Class F insulation; c CSA US listed, three phase only; thermal overload protection: built-in with automatic reset on single phase; Three phase models require external overloads in panel; power cord: All 30' long ; Single phase 16/3, with 115 V or 230 V plug; and Three phase 16/4 STO, bare leads. The motors features are as follows: NEMA standard JM frame for 3656 or T-frame for 3756 mechanical seal, JP or T-frame for packed box. Maximum temperature is 104 F (40C) continuous and 140F (60C) intermittent. The NEMA motor features: Corrosion resistant stainless steel construction; Built-in surge arrestor is provided on single phase motors; Stainless steel splined shaft; Hermetically sealed windings; Replaceable motor lead assembly; NEMA mounting dimensions; Control box is required with 3-wire single-phase units and Three-phase motors require a starter with Class 10 overload protection. ); and O-ring, Assures positive sealing against contaminants and oil leakage. These pumps require a separate field installed external check valve to prevent backflow. Bowls: Stainless steel for strength and abrasive resistance. Check Valve: Not supplied, order separately, pumps have 2" NPT discharge threads. Stainless Steel Casing: Polished stainless steel is strong, attractive and corrosion resistant. Hex Shaft Design: Six sided shafts for positive impeller drive. Shaft Coupling: Exposed for ease of field alignment to motor shaft and to check pump rotation. Bearings: Proprietary engineered polymer bearing material is a super strong, abrasion and heat resistant design. The shallow well jet pumps in this group feature pipe connections of 1 NPT discharge, 1 NPT suction, with a pressure switch of AS4 that is preset at 30-50 PSI. The three phase 60 Hz models have Class 10 overload protection must be provided in separately ordered starter unit; STOW power cords all have bare lead cord ends; designed for Continuous Operation pump ratings are within the motor manufacturer's recommended working limits and can be operated continuously without damage when fully submerged; Bearings: Upper and lower heavy duty ball bearing construction; Power Cable is severe duty rated, oil and water resistant with epoxy seal on motor end which provides secondary moisture barrier in case of outer jacket damage and to prevent oil wicking (Standard cord is 20'. Automatic models include Mechanical Float Switch assembled and preset at the factory. Automatic models include Mechanical Float Switch assembled and preset at the factory. 3872 WW Series Sewage Pump Available in HP (60 Hz)Models: 3872This residential wastewater submersible sewage pump is primarily used in residential sewage systems, dewatering, water transfer and anywhere waste or drainage must be disposed of quickly, quietly and efficiently. The two component motor compartment allows for easy access to the wiring and replaceable components. Starter and heaters must be ordered separately. They are corrosion resistant and non-toxic. Discharge Head: Cast stainless steel discharge head features built-in safety loops and an upthrust limiting stud which is factory set to prevent the rotating assembly from upthrusting. _Hasync.push(['Histats.track_hits', '']); ; Class B insulation; oil-filled design; and high strength carbon steel shaftST51 Motor: .50 HP, 3400 RPM; 115 volts; PSC designST71 Motor: .75 HP, 3400 RPM; 115 volts; PSC designSTS21/STS31 Available in and 1/3 HP (60 Hz)Models: STS21 and STS31This submersible sump pump is primarily designed for basement draining, dewatering, water transfer and filtered effluent. The motor features are as follows: Single phase: 3500 RPM, 1/2 HP and 1 HP, 115 and 230 V, 60 Hz; Built-in starter with full overload and temperature protection; Class F insulation; air filled design; upper and lower heavy duty ball bearing construction and power cord is 50 feet. Goulds Water Technology Jet Shallow Well Pump 1.5 HP 1 Ph # J15S, Specifically designed for use on shallow applications like homes and cottages. The multi-stage convertible jet pumps in this group feature pipe connections of 1 NPT discharge, 1 NPT suction, 1 NPT pressure and a - 1 HP AS4 and a 2 HP AS10 pressure switches that are both preset at 30-50 PSI. Hertz: 60, capacitor start RPM: 3500 The specifications would come from the GS and Solo. These multi-stage centrifugal pumps have capacities to 95 GPM (21.5 m3/hr) with pipe connections; LCA 1 x 1 NPT, LCB 1 x 1 NPT, LCC 1 x 1 NPT and maximum working pressure to 125 PSI (8 bar). Could not complete your request right now. HydroPro tanks feature a heavy-duty butyl diaphragm, rigid polypropylene liner, all stainless steel system connection, and heavy-duty polypropylene base eliminates corrosionAquavar ABII Pump ControllerModels: 1AB2, 2AB2, 3AB2, 5AB2The Aquavar ABII pump controller is a pre-packaged system that includes: pump motor, pressure tank*, pressure transducer, piping tee, pressure gauge, wiring with flexible conduit. Residential Shallow Well Jet Pump 1/2, 3/4, 1 and 1 1/2 HPJS+ J5S, J5SH, J10S, J15S, Applications:HomesCottagesBooster Service. Also featuring a built-in overload, an automatic reset and a stainless steel shaft. The pressure switch is the AS4 preset (30 50 PSI). The pump has heads to 128 feet, reprime capabilities: to 25 feet suction lift, maximum working pressure: 125 PSIG, maximum water temperature: 140F (60C). QP:9e"ct%.O#5dn&l8oXU$'^D:ok2ITK75.1||#nT6tT\H6qA3.XI8LVfH16N r!p: `D^'J2OkFNL{!pps# Maximum temperature is 104 F (40C) continuous and 140F (60C) intermittent. For the best experience on our site, be sure to turn on Javascript in your browser. 0000006643 00000 n Copyright Garrison Brothers Well Service. Dual Voltage: 115 / 230 V 0000012954 00000 n Shop By Phone ! 0000005362 00000 n The motor features are: NEMA standard, JM shaft, Open Drip Proof or Totally Enclosed Fan Cooled; Single phase: 3 HP, 115/230 V; 5 HP, 230 V; Three phase: 3 and 5 HP, 208-230/460 V or 575 V. Note: Pump is not rated for 50 Hz service. HSJ Available in , 1, 1 , & 2 HP (60Hz)Model: HSJThis multi-stage convertible jet pump is great for use in homes or cottages, on farms, and where booster service is required. 0000018958 00000 n MCC END SUCTION CENTRIFUGAL PUMPSModels: 1MC, 2MC, 3MCThese cast iron pumps with 316 stainless steel impellers are primarily used in a broad range of general applications; water circulation, booster service, liquid transfer, spray system, chillers, washing/cleaning systems, injection molding cooling, air scrubbers, heat exchangers, filtration systems, jockey pumps, OEM applications and general water services. We only sell within the 48 adjacent United States. The self priming centrifugal pumps in this group feature pipe connections are 1 NPT suction and 1 NPT discharge, with capacities to 110 GPM at 5 foot suction lift. 0000007695 00000 n 1DW - Available in - 1 HP (60 Hz)Model: 1DWThis submersible dewatering pump is primarily used for draining ditches and pits, industrial water drainage/transfer, handling dirty waters, water transfer, and excavating drainage in building trade. Starter and heaters must be ordered separately. 0000003116 00000 n Aquarvar SPDModels: SPDThe Aquavar SPD variable speed single pump drive is primarily used for water pumps serving commercial buildings, pressure boosting for light industry, wash systems, filtration, rural water and municipal systems and groundwater/irrigation. var hs = document.createElement('script'); hs.type = 'text/javascript'; hs.async = true; Power cord: 20 feet long. The deep well vertical jet pumps in this group feature pipe connections of 1 NPT discharge, 1 NPT suction, 1 NPT drive pressure and a - 1 HP AS4 and a 2 HP 230 V only AS10 60 HZ pressure switches that are both preset at 30-50 PSI. This 60 Hz, single phase product includes standard NEMA service factors and operates at 3500 RPM. The kit includes: CentriPro Three Phase Motor 1.5 5 HP, 230 V; CentriPro Aquavar SOLO pump controller with Transducer; Goulds Water Technology Pumps GS Water End (pump). Some manufacturers require internet retailers to display a price at or above manufacturers established MAP ("Minimum Advertised Price"). 0000004734 00000 n Spring loaded, o-ring poppet design for positive seal in all conditions. Stainless Steel Casing: Polished stainless steel is strong, attractive and corrosion resistant. Hex Shaft Design: Six sided shaft for positive impeller drive. Inlet Strainer: Molded suction strainer built into motor adapter. Engineered Polymer Bearings: The proprietary, engineered polymer bearing material is extremely strong and highly resistant to abrasion and wear.

This pump features a 1 NPT discharge with capacities to 41 GPM and total heads to 95 TDH. TEFC and explosion-proof motors are available. Three phase models are supplied with bare leads. Also featuring a built-in overload, an automatic reset and a stainless steel shaft. Goulds J15S, Shallow Well Jet Pump, JS+ Series, 1-1/2 HP, 115/230 Volts, 1 Phase, 1-1/4" NPT Suction, 1" NPT Discharge, 26.6 GPM at 5 ft (30 psi), Cat Iron Body, Skip to the beginning of the images gallery. $"7 g}*P=O &/J. 0000011267 00000 n 0000008753 00000 n Available for automatic and manual operation. GTModel GTThis self priming centrifugal pump is primarily used for lawn sprinkling, irrigation, air conditioning systems, heat pumps water transfer and dewatering. Call our toll free number 1-800-429-0800 to speak to an expert today. MPN: J15S Supreme Water Sales was founded in 2007 with One Company Motto: " No One Shops Online To Pay More! Can be operated continuously without damage. ); and motor cover O-ring assures positive sealing against contaminants and oil leakage. The submersible sewage pumps in this group have a maximum solid size of 3; a 4 discharge 125# ANSI flange; maximum capacity 620 GPM; maximum total head of 60 feet; 300 Series stainless steel fasteners; 20 power cord and standard silicon carbide/silicon carbide outer seal. This pump can come in 3 configurations: all bronze pump, all cast iron pump and bronze fitted pump.

0000052676 00000 n The motors can be fully submerged in high grad turbine oil for lubrication and efficient heat transfer. E3g



Sitemap 45